Philips English, Naming radio stations, Clearing station names, Tuning to stored radio stations, Resorting stored radio stations, Or, if you have changed your mind

TUNER

English

Tuning to stored radio stations

1Turn SOURCE SELECT to TUNER to select the tuner. yTUNER is displayed.

2Turn TUNER PRESET X to select a preset radio station. yPRESET, the preset number and station are displayed.

Resorting stored radio stations

After programming radio stations, you might want to change their sequence. RESHUFFLE allows you to exchange the positions of presets.

1Choose * TUNER from the menu and press NEXT 2.

2Choose RESHUFFLE and press NEXT 2.

yPRESET, a preset number and station are displayed.

3Turn TUNER PRESET X to select a preset station.

4Press ENTER / OK to confirm the selection.

yThe selected preset number SWAP <-> and a second preset number are displayed.

5Turn TUNER PRESET X to select the other preset station.

6Press ENTER / OK to confirm the exchange.

yRESHUFFLED is displayed briefly and these two preset numbers are swapped.

Naming radio stations

It is possible to assign a name to any of the preset radio stations. RDS station names also can be overwritten.

1Choose * TUNER from the menu and press NEXT 2.

2Choose GIVE NAME and press NEXT 2. yA preset radio station is displayed.

3Turn TUNER PRESET X to select the preset to be renamed.

4Press ENTER / OK to confirm your selection.

yThe existing name or ________ is displayed.

5Turn TUNER PRESET X to select a letter and NEXT 2 or 1 PREV. to move to the next or previous position.

6After you have entered the entire name, press ENTER / OK to confirm.

ySTORED is displayed and the name is stored.

Note: If you want to use the transmitted RDS station name again, simply clear the given name.

Clearing station names

1Use the menu option * TUNER, choose GIVE NAME. yA preset radio station is displayed.

2Turn X MENU NAVIGATOR to select the name to be cleared.

3Press ENTER / OK to confirm your selection.

4Press 1 PREV. while the first letter is flashing. y CL is flashing to the left of the station name.

5Press ENTER / OK to clear the station name.

Or, if you have changed your mind,

press 1 PREV. to leave the station name as it is.

22