Pioneer 1020 Remote Control Mode Setup, Flicker Reduction Setup

The system and the other setup11
106
En
Remote Control Mode Setup
• Default setting: 1
This sets this receiver’s remote control mode to
prevent erroneous operation when multiple
units of the receiver are being used.1
1 Select ‘ Remote Control Mode Setup ’
from the
Other Setup menu.
2 Select the
Remote Control Mode setting
you want.
3 Select “
OK ” to change the remote control
mode.
4 Follow the instructions on the screen to
change the remote control’s setting.
See Operating multiple receivers on page 76.
5 When you’re finished, press RETURN .
You will return to the Other Setup menu.
Flicker Reduction Setup
• Default setting: OFF
The GUI screen’s resolution can be increased.
If you feel the GUI screen is hard to see, try
changing this setting. Note this setting only
affects the GUI screen; it has no influence on
the video output.
1 Select ‘ Flicker Reduction Setup ’ from the
Other Setup menu.
2 Select the Flicker Reduction setting you
want.
3 When you’re finished, press
RETURN .
You will return to the Other Setup menu.
Note
1 If you change this receiver’s setting, also change the setting on the remote control.
VSX-1020_UC.book 106 ページ ２０１０年１月７日 木曜日 午後６時０分