Pioneer 1020 manual Connecting your equipment Connecting other audio components

03Connecting your equipment

Connecting other audio components

This receiver has both digital and analog inputs, allowing you to connect audio components for playback.

One of these inputs have corresponding outputs for use with analog audio recorders.

When you set up the receiver you’ll need to tell the receiver which input you connected the component to (see also The Input Setup menu on page 40).

IN 4 OUT LAN COAXIAL ASSIGNABLE OPTICAL

(10/100)	IN 1	IN 2	IN 1		IN 2	ASSIGNABLE
						ADAPTER PORT
						(OUTPUT 5 V	100 mA MAX)
	(DVD)	(CD)	(	)	(DVR/BDR)

PRE OUT

				ANTENNA
TV/SAT	VIDEO	CD	CD-R/TAPE	SUBWOOFER
IN	IN	IN	OUT IN		AM LOOP	FM UNBAL 75
			FRONT	CENTER	SURROUND	SURROUND
			R	L	R	L R

CONTROL

IN OUT

SPEAKERS A

•If your turntable has line-level outputs (i.e., it has a built-in phono pre-amp), connect it to the CD inputs instead.

•If you’re connecting a recorder, connect the analog audio outputs to the analog audio inputs on the recorder.

About the WMA9 Pro decoder

This unit has an on-board Windows Media™ Audio 9 Professional1 (WMA9 Pro) decoder, so it is possible to playback WMA9 Pro-encoded audio using HDMI, coaxial or optical digital connection when connected to a WMA9 Pro- compatible player. However, the connected DVD player, set-top box, etc. must be able to output WMA9 Pro format audio signals through a coaxial or optical digital output.

		R ANALOG L	COAXIAL OPTICAL
R REC		AUDIO OUT	DIGITAL OUT
	L	Select one
AUDIO IN

CD-R, MD, DAT, etc.

Note

1• Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

• With WMA9 Pro, sound problems may occur depending on your computer system. Note that WMA9 Pro 96 kHz sources will be downsampled to 48 kHz.

28

En