12Additional information

Symptom

Remedy

Noisy, intermittent, or

• Sometimes a video deck may output a noisy video signal (during scanning,

distorted picture.

for example), or the video quality may just be poor (with some video game units,

 

for example). The picture quality may also depend on the settings, etc. of your

 

display device. Switch off the video converter and reconnect the source and

 

display device using the same type of connection (component or composite),

 

then start playback again.

Video signals are not output from the component terminal.

•When a monitor only compatible with resolutions of 480i is connected to the component terminal and another monitor is connected to the HDMI terminal, the video signals may not be output to the monitor connected to the component terminal. If this happens, do the following:

–Turn off the power of the monitor connected to the HDMI terminal.

–Set RES on the VIDEO PARAMETER menu to PURE (page 70).

Settings

Symptom

Remedy

The Auto MCACC Setup

• The ambient noise level may be too high. Keep the noise level in the room as

continually shows an error.

low as possible (see also Problems when using the Auto MCACC Setup on

 

page 40). If the noise level cannot be kept low enough, you will have to set up

 

the surround sound manually (page 99).

 

• When using only one surround back speaker, connect it to the SURROUND

 

BACK L (Single) terminals.

 

• To use a 5.1-channel speaker set, use the surround speakers for the surround

 

channel, not the surround back channel.

 

• Make sure there are no obstacles between the speakers and the microphone.

 

• If Reverse Phase is displayed, try the following:

 

– The speaker’s wiring (+ and –) may be inverted. Check the speaker

 

connections.

 

– Depending on the type of speakers and their installation conditions, Reverse

 

Phase may be displayed even if the speakers are properly connected. If this

 

happens, select GO NEXT and continue.

 

– If the speaker is not pointed to the microphone (listening position) or when

 

using speakers that affect the phase (dipole speakers, reflective speakers, etc.),

 

it may not be possible to properly identify the polarity.

 

 

After using the Auto MCACC

• There may have been some low frequency noise in the room from an air-

Setup, the speaker size

conditioner, motor, etc. Switch off all other appliances in the room and use

setting is incorrect.

Auto MCACC Setup again.

 

• Depending on a number of factors (room size, speaker placement, etc.) this

 

may occur in some cases. Change the speaker setting manually in Speaker

 

Setting on page 101, and use the ALL (Keep SP System) option for the Auto

 

MCACC menu in Automatic MCACC (Expert) on page 86 if this is a recurring

 

problem.

 

 

Can’t adjust the Fine Speaker

• Check that the speakers are all in phase (make sure the positive (+) and

Distance setting (page 90)

negative (–) terminals are matched up properly).

properly.

 

 

 

The display shows KEY LOCK

• With the receiver in standby, press  STANDBY/ON while holding down

ON when you try to make

SPEAKERS to disable the key lock.

settings.

 

 

 

112

En

Page 111 Page 113
Page 112
Image 112
Pioneer 1020 manual Settings
Page 111 Page 113

1020 specifications

The Pioneer 1020 is a versatile and robust audio receiver that stands out in the crowded home entertainment market. Launched with a focus on delivering superior sound quality and advanced functionality, the 1020 model exemplifies Pioneer's commitment to providing an immersive audio experience for home theater enthusiasts.

One of the main features of the Pioneer 1020 is its support for high-definition audio formats, including Dolby Atmos and DTS:X. These advanced surround sound technologies allow users to enjoy a three-dimensional audio landscape, bringing movies and music to life in ways traditional sound systems often cannot. The receiver comes equipped with multiple HDMI inputs, enabling seamless connectivity with various audio and video sources, including TVs, Blu-ray players, and gaming consoles.

Another notable characteristic of the Pioneer 1020 is its multi-zone capability. This feature allows users to set up different zones in their home, enabling the use of separate audio sources in various rooms. As a result, one can enjoy the latest blockbuster in the living room while others listen to their favorite playlists in another part of the house, all managed through the intuitive interface.

Pioneer's proprietary MCACC (Multi-Channel Acoustic Calibration System) technology is also integrated within the 1020. This system allows the receiver to analyze the room acoustics and automatically calibrate the sound output to ensure optimal audio performance based on the environment. In addition, the receiver supports high-resolution audio files, enabling playback of formats such as FLAC and WAV, making it an excellent choice for audiophiles.

The Pioneer 1020 also features built-in streaming capabilities. With support for popular services like Spotify, Apple Music, and Tidal, users can easily access their favorite tracks with minimal hassle. The device even allows playback from mobile devices via Bluetooth or Wi-Fi, adding a layer of convenience to the listening experience.

A sleek and modern design complements the advanced technologies within the Pioneer 1020. The user-friendly interface and remote control functionality ensure that accessing all of its features is straightforward and intuitive. With all these characteristics, the Pioneer 1020 stands as a powerful player in the home audio space, offering an exceptional blend of performance and versatility for any multimedia setup.
Top Page Image Contents