Control with HDMI function 07

63
En
English Français
Deutsch
Nederlands
Italiano Español

HDMI Setup

You must adjust the settings of this receiver as
well as Control with HDMI-compatible
connected components in order to make use of
the Control with HDMI function. For more
information see the operating instructions for
each component.
1 Press , then press
Home Menu
.
2 Select ‘
System Setup
’, then press
ENTER
.
3 Select ‘
Other Setup
’, then press
ENTER
.
4 Select ‘
HDMI Setup
’, then press
ENTER
.
5 Select the ‘
Control
’ setting you want.
Choose whether to set this unit’s Control with
HDMI function ON or OFF. You will need to set
it to ON to use the Control with HDMI
function.
When using a component that does not
support the Control with HDMI function, set
this to OFF.
•ON – Enables the Control with HDMI
function. When this unit’s power is turned
off and you have a supported source begin
playback while using the Control with
HDMI function, the audio and video output
from the HDMI connection are output from
the TV.
•OFF – The Control with HDMI is disabled.
Synchronized operations cannot be used.
When this unit’s power is turned off, audio
and video of sources connected via HDMI
are not output.
6 Select the ‘
Control Mode
’ setting you
want.
Choose whether you want to enable HDMI for
all linked functions or the PQLS function only.
However, Display Power Off will activate the
settings set forth in step 7 below.
•ALL – Enabled for all linked functions.
•PQLS – Enabled only for the PQLS function;
disabled for all other linked functions.
7 Select the ‘
Display Power Off
’ setting
you want.
If the TV’s power is turned off while using the
Control with HDMI function, the receiver’s
power is also turned off (all power off function).
This function can be disabled.
•YES – The all power off function is enabled.
The receiver’s power turns off together with
the TV’s power.
This function only works when the input for
a component connected to the receiver by
Control with HDMI is selected or when
watching the TV.
•NO – The all power off function is disabled.
The receiver’s power is not affected when
the TV’s power is turned off.
8 When you’re finished, press
HOME MENU
.
You will finish to HOME MENU.
RECEIVER
2. V olume Setup
3.
Remote Control Mode Setup
4.
Flicker Reduction Setup
5. Pairing Bluetooth Device
1. HDMI Setup
4d.Other Setup
A/V RECEIVER
Exit Return
4e1.HDMI Setup
A/V RECEIVER
Exit Finish
Control : ON
Control mode : ALL
Display Power Off : YES
VSX-1020_UC.book 63 ページ ２０１０年１月７日　木曜日　午後６時０分