08Using other functions

Refer to the instructions that came with the recorder if you are unsure how to do this. Most video recorders set the audio recording level automatically—check the component’s instruction manual if you’re unsure.

4Start recording, then start playback of the source component.

Reducing the level of an analog signal

The input attenuator lowers the input level of an analog signal when it’s too strong. You can use this if you find that the OVER indicator lights often or you can hear distortion in the sound.1

•Press RECEIVER , then press A.ATT to switch the input attenuator on or off.

Using the sleep timer

The sleep timer switches the receiver into standby after a specified amount of time so you can fall asleep without worrying about the receiver being left on all night. Use the remote control to set the sleep timer.

Dimming the display

You can choose between four brightness levels for the front panel display. Note that when selecting sources, the display automatically brightens for a few seconds.

•Press RECEIVER , then press DIMMER repeatedly to change the brightness of the front panel display.

Checking your system settings

Use the status display screen to check your current settings for features such as your current MCACC preset.

1Press RECEIVER , then press STATUS to check the system settings.

These appear on the front panel display.

The front panel display shows each of the following settings for three seconds each:

Input Source

↓

Sampling Frequency

↓

MCACC preset

↓

ZONE 2 input

•Press RECEIVER , then press SLEEP repeatedly to set the sleep time.

 

30 min

 

 

60 min

 

 

 

 

Off

 

 

 

90 min

 

 

 

 

 

2When you’re finished, press STATUS again to switch off the display.

•You can check the remaining sleep time at any time by pressing SLEEP once. Pressing

repeatedly will cycle through the sleep options again.2

Note

1 The attenuator isn’t available with digital sources, or when using the Stream Direct (ANALOG DIRECT) modes. 2 • You can also switch off the sleep timer simply by switching off the receiver.

• The sleep timer is valid for all zones. If any zone is on, the sleep timer continues functioning.

74

En

Page 73 Page 75
Page 74
Image 74
Pioneer 1020 manual Reducing the level of an analog signal, Using the sleep timer, Dimming the display
Page 73 Page 75

1020 specifications

The Pioneer 1020 is a versatile and robust audio receiver that stands out in the crowded home entertainment market. Launched with a focus on delivering superior sound quality and advanced functionality, the 1020 model exemplifies Pioneer's commitment to providing an immersive audio experience for home theater enthusiasts.

One of the main features of the Pioneer 1020 is its support for high-definition audio formats, including Dolby Atmos and DTS:X. These advanced surround sound technologies allow users to enjoy a three-dimensional audio landscape, bringing movies and music to life in ways traditional sound systems often cannot. The receiver comes equipped with multiple HDMI inputs, enabling seamless connectivity with various audio and video sources, including TVs, Blu-ray players, and gaming consoles.

Another notable characteristic of the Pioneer 1020 is its multi-zone capability. This feature allows users to set up different zones in their home, enabling the use of separate audio sources in various rooms. As a result, one can enjoy the latest blockbuster in the living room while others listen to their favorite playlists in another part of the house, all managed through the intuitive interface.

Pioneer's proprietary MCACC (Multi-Channel Acoustic Calibration System) technology is also integrated within the 1020. This system allows the receiver to analyze the room acoustics and automatically calibrate the sound output to ensure optimal audio performance based on the environment. In addition, the receiver supports high-resolution audio files, enabling playback of formats such as FLAC and WAV, making it an excellent choice for audiophiles.

The Pioneer 1020 also features built-in streaming capabilities. With support for popular services like Spotify, Apple Music, and Tidal, users can easily access their favorite tracks with minimal hassle. The device even allows playback from mobile devices via Bluetooth or Wi-Fi, adding a layer of convenience to the listening experience.

A sleek and modern design complements the advanced technologies within the Pioneer 1020. The user-friendly interface and remote control functionality ensure that accessing all of its features is straightforward and intuitive. With all these characteristics, the Pioneer 1020 stands as a powerful player in the home audio space, offering an exceptional blend of performance and versatility for any multimedia setup.
Top Page Image Contents