!CUSTOMis an adjusted equalizer curve
thatyou create.
!WhenFLAT is selected, no supplement or
correctionis made to the sound. This is
usefulto check the effect of the equalizer
curvesby switching alternatively between
FLATand a set equalizer curve.
1 Displaythe audio menu.
Referto Introduction of audio adjustments on
theprevious page.
2 UseMULTI-CONTROL to select P.EQ.
3 TurnMULTI-CONTROL to select the
equalizer.

Adjusting equalizer curves

Thefactory supplied equalizer cur ves can be
adjustedto a fine degree (nuance control).
1 Displaythe audio menu.
Referto Introduction of audio adjustments on
theprevious page.
2 UseMULTI-CONTROL to select EQ
(equalizeradjustment).
3 PushMULTI-CONTROL left or right to
selectthe equalizer band to adjust.
LOW(low)—MID (mid)—HIGH (high)
4 PushMULTI-CONTROL up or down to
adjustthe level of the equalization band.
+6to –6is displayed as the level is increased
ordecreased.
#Youcan then select another band and adjust
thelevel.

Fine-adjusting equalizer curve

Youcan adjust the center frequency and the Q
factor(curve characteristics) of each currently
selectedcurve band (LOW/MID/HI).
Level (dB)
Center frequency
Q=2N Q=2W
Frequency (Hz)
1 Displaythe audio menu.
Referto Introduction of audio adjustments on
theprevious page.
2 UseMULTI-CONTROL to select EQ
(equalizerfine adjustment).
3 PushMULTI-CONTROL left or right to
selectthe frequency to adjust.
Low:40HZ—80HZ—100HZ—160HZ
Mid:200HZ—500HZ—1KHZ—2KHZ
High:3KHZ—8KHZ—10KHZ—12KHZ
4 PushMULTI-CONTROL up or down to
adjustthe Q factor.
2W—1W—1N—2N
Adjusting loudness
Loudnesscompensates for deficiencies in the
low-and high-sound ranges at low volume.
1 Displaythe audio menu.
Referto Introduction of audio adjustments on
theprevious page.
2 UseMULTI-CONTROL to select
LOUDNESS.
3 PressMULTI-CONTROL to turn loudness
on.
Loudnesslevel (e.g., MID) appears in the dis-
play.
#Toturn loudness off, press MULTI-CONTROL
again.
Audio Adjustments
En 39
English
Section
09