#Toturn high pass filter off, press
MULTI-CONTROLagain.
4 PushMULTI-CONTROL left or right to
selectcut-off frequency.
50—63—80—100—125(Hz)
Onlyfrequencies higher than those in the se-
lectedrange are output from the front or rear
speakers.
Boosting the bass
Bassboost function boosts the bass level of
sound.
1 Pressand hold SW/BASS to display
BASSBOOST setting mode.
2 PushMULTI-CONTROL up or down to
selecta desired level.
0to+6 is displayed as the level is increased or
decreased.
Note
Youcan also switch to this setting mode in the
menuthat appears by using
MULTI-CONTROL.
Adjusting source levels
SLA(source level adjustment) lets you adjust
thevolume level of each source to prevent ra-
dicalchanges in volume when switching be-
tweensources.
!Settingsare based on the FM volume level,
whichremains unchanged.
1 Comparethe FM volume level with the
levelof the source you wish to adjust.
2 Displaythe audio menu.
Referto Introduction of audio adjustments on
page38.
3 UseMULTI-CONTROL to select SLA.
4 PushMULTI-CONTROL up or down to
adjustthe source volume.
Eachtime MULTI-CONTROL is pushed up or
down,source volume increases or decreases.
+4to –4is displayed as the source volume is
increasedor decreased.
Notes
!TheAM volume level can also be adjusted
withsource level adjustments.
!Thebuilt-in CD player and the multi-CD player
areset to the same source level adjustment
volumeautomatically.
!Externalunit 1 and external unit 2 are set to
thesame source level adjustment volume
automatically.
Audio Adjustments
En 41
English
Section
09