XM tuner

Listening to XM Satellite Radio

Youcan use this unit to control an XM satellite
digitaltuner (GEX-P920XM), which is sold
separately.
Fordetails concerning operation, refer to the
XMtuner ’s operation manuals. This section
providesinformation on XM operations with
thisunit which differs from that described in
theXM tuner ’s operation manual.
!Withthis unit, you can operate two addi-
tionalfunctions: XM channel direct selec-
tionand preset channel list.
%Selectingan XM band
PressBAND/ESC.
#Bandcan be selected from XM1,XM2 or
XM3.
%Selectinga channel
PushMULTI-CONTROL left or right.
#Ifyou push and hold MULTI-CONTROL left or
right,you can increase or decrease channel num-
bercontinuously.
#Youcan also perform tuning from a desired
channelcategory. (Refer to Selecting a channel in
thechannel category on the next page.)

Switching the XM display

%PressDISP/SCRL to switch the XM dis-
play.

Selecting an XM channel directly

Youcan select an XM channel directly by en-
teringthe desired channel number.
1 PressDIRECT on the remote control.
Channelnumber input display appears.
2 Use0 to 9 on the remote control to
inputthe desired channel number.
#Tocancel the input numbers, press CLEAR on
theremote control.
3 PressDIRECT on the remote control.
TheXM channel of entered number is
selected.
Note
Afterentering the number input mode, if you do
notperform an operation within about eight sec-
onds,the mode is automatically canceled.
Storing and recallingbroadcast

stations

Youcan easily store up to six broadcast sta-
tionsfor later recall.
!Sixstations for each band can be stored in
memory.
1 Press /LIST.
Presetscreen is displayed.
2 UseMULTI-CONTROL to store the se-
lectedstation in memory.
Turnto change the preset number. Press and
holdto store.
TheXM preset number youhave selected will
flashand then remain lit. The selected station
hasbeen stored in memor y.
3 UseMULTI-CONTROL to select the de-
siredstation.
Turnto change the station; press to select.
#Youcan also change the station by pushing
MULTI-CONTROLup or down.
#Ifyou do not operate the list within about 30
seconds,the display is automatically returned to
theordinary display.

Selecting the XM channel select

mode

Youhave two methods for selecting a channel:
bynumber and by category. When selecting
bynumber, channels in any category can be
selected.Select by category to narrow your
searchdown to only channels in a particular
category.
Available accessories
En
48
Section
12