#PushMULTI-CONTROL left or right to display
thedevice name and BD address.
6 PressMULTI-CONTROL to establish con-
nection.
Whileconnecting, PAIRING flashes. If the con-
nectionis established, PAIRED is displayed.
#Ifthe connection fails, ERROR is displayed. In
thiscase, try again from the beginning.
#PINcode is set to 0000 as the default. You
canchange this code in the initial setting. Refer
toEntering PIN code for Bluetooth wireless con-
nectionon page 31.
Disconnecting a Bluetooth device
Thisfunction can be operated only when the
Bluetoothwireless connection is being estab-
lished.
1 Displaythe connection menu.
Referto Introduction to connection operations
onpage 27.
2 UseMULTI-CONTROL to select
DISCONNECT.
3 PushMULTI-CONTROL up or down to
selecta device.
#Ifonly one device was found, this step cannot
beperformed.
4 PressMULTI-CONTROL to disconnect
theBluetooth wireless connection.
Whiledisconnecting, DISCONNECTING
flashes.If the Bluetooth wireless connection is
terminated,DISCONNECTED is displayed.
#Ifmultiple Bluetooth devices have been con-
nectedand you wish to disconnect them, press
MULTI-CONTROLand then select the device. In
thiscase, repeat operation from step 3.
Deleting a paired Bluetooth device
1 Displaythe connection menu.
Referto Introduction to connection operations
onpage 27.
2 UseMULTI-CONTROL to select
DELETEDEVICE.
3 PushMULTI-CONTROL up or down to
selecta device.
#Ifonly one device was found, this step cannot
beperformed.
#PushMULTI-CONTROL left to display the BD
address.
#Ifdevice name cannot be obtained, BD ad-
dressis displayed.
4 Whenthe device name is being dis-
played,push MULTI-CONTROL right to dis-
playDELETE YES.
Deletingdevice is now on standby.
#Ifyou do not want to delete the device, push
MULTI-CONTROLleft.
5 PressMULTI-CONTROL to delete the de-
vice.
Whiledeleting, DELETING flashes. After the
deviceis deleted, DELETED is displayed.
Connecting a paired Bluetoothdevice and selecting a service
Bluetoothservice of the paired device can be
selected.You can choose a Bluetooth service
fromPHONE service, AVRCP service or A2DP
service.
1 Displaythe connection menu.
Referto Introduction to connection operations
onpage 27.
2 UseMULTI-CONTROL to select
PAIREDDEVICE.
3 PushMULTI-CONTROL up or down to
selecta device.
#Ifonly one device was found, this step cannot
beperformed.
#PushMULTI-CONTROL left or right to switch
theBD address and device name.
#Ifdevice name cannot be obtained, BD ad-
dressis displayed.
Using Bluetooth wireless technology
En 29
English
Section
08