Adjusting initial settings
1 PressSRC and hold until the unit turns
off.
2 PressMULTI-CONTROL and hold until
theinitial setting menu appears in the dis-
play.
3 TurnMULTI-CONTROL to select one of
theinitial settings.
CLNDR(calendar)—CLOCK (clock)—
WARNING(warning tone)—AUX1 (auxiliary
input1)—AUX2 (auxiliary input 2)—REAR SP
(rearoutput and subwoofer controller)—TEL
(telephonemuting/attenuation)—
BUILT-INAMP (power amp setting)—
EVERSCROLL(ever scroll)—BT AUDIO (Blue-
toothaudio)—PIN CODE INPUT (pin code
input)—EDITDEVICE NAME (device name
edit)—BTINFO (Bluetooth version informa-
tion)—BTRESET :MEMORY (Bluetooth reset)
—SOFTWAREUPDATE (software update)
#Youcan also select the function by pressing
FUNCTIONon the remote control.
#Tocancel initial settings, press BAND/ESC.
Setting the dateThecalender display adjusted in this mode ap-
pearswhen the telephone source is selected
orsources and the feature demo are off.
1 Displaythe initial setting menu.
Referto Adjusting initial settings on this page.
2 UseMULTI-CONTROL to select CLNDR.
CLNDRappears in the display.
3 PushMULTI-CONTROL left or right to
selectthe segment of the calendar display
youwish to set.
Day—Month—Year
Asyou select segments of the calendar dis-
playthe segment selected will blink.
4 PushMULTI-CONTROL up or down to
setthe date.
PushingMULTI-CONTROL up will increase
theselected day, month or year. Pushing
MULTI-CONTROLdown will decrease the se-
lectedday, month or year.
Setting the clockUsethese instructions to set the clock.
1 Displaythe initial setting menu.
Referto Adjusting initial settings on this page.
2 UseMULTI-CONTROL to select CLOCK.
3 PushMULTI-CONTROL left or right to
selectthe segment of the clock display you
wishto set.
Hour—Minute
Asyou select segments of the clock display,
theselected segment blinks.
4 PushMULTI-CONTROL up or down to
puta clock right.
Note
Youcan match the clock to a time signal by
pressingMULTI-CONTROL.
!If00 to 29, the minutes are rounded down.
(e.g.,10:18 becomes 10:00.)
!If30 to 59, the minutes are rounded up. (e.g.,
10:36becomes 11:00.)
Switching the warning toneIfthe front panel is not detached from the
headunit within four seconds of turning off
theignition, a warning tone sounds. You can
turnoff the warning tone.
1 Displaythe initial setting menu.
Referto Adjusting initial settings on this page.
2 UseMULTI-CONTROL to select
WARNING.
Initial Settings
En
46
Section
04