Setting the internal poweramplifier
Thisunit features high power amplifier. How-
ever,in particular system, external amplifiers
areused instead of internal amplifier. If you
useexternal amplifiers in order to establish a
multi-ampsystem, and dont use internal am-
plifier,it is recommended to turn off the inter-
nalamplifier. Turning off internal amplifier
reducesthe noise that comes from the beha-
viorof internal amplifier.
!Forthis function, verify the topic Adjusting
initialsettings before initiating the opera-
tion.
1 Displaythe initial setting menu.
2 UseMULTI-CONTROL to select
BUILT-INAMP.
3 PressMULTI-CONTROL to turn the inter-
nalpower amplifier on.
#Toturn the internal power amplifier off, press
MULTI-CONTROLagain.
Switching the ever scroll
WhenEver Scroll is set to ON, recorded text in-
formationscrolls continuously in the display.
Setto OFF if you preferthe information to
scrolljust once.
1 Displaythe initial setting menu.
Referto Adjusting initial settings on page 46.
2 UseMULTI-CONTROL to select
EVERSCROLL.
3 PressMULTI-CONTROL to turn the ever
scrollon.
#Toturn the Ever Scroll off, press
MULTI-CONTROLagain.
Activating the BTAUDIO source
Youneed to activate the BT AUDIO source in
orderto use a Bluetooth audio player.
1 Displaythe initial setting menu.
Referto Adjusting initial settings on page 46.
2 UseMULTI-CONTROL to select
BTAUDIO.
3 PressMULTI-CONTROL to turn the
BTAUDIO source on.
#Toturn the BT AUDIO source off, press
MULTI-CONTROLagain.
Entering PIN code forBluetooth wireless connection
Toconnect your cellular phone to this unit via
Bluetoothwireless technology, you need to
enterPIN code on your phone to verify the
connection.The default code is 0000, but you
canchange this in this function.
!Withsome Bluetooth audio players, you
maybe required to enter the Bluetooth
audioplayer PIN code in advance to set
thisunit for a connection.
1 Displaythe initial setting menu.
Referto Adjusting initial settings on page 46.
2 UseMULTI-CONTROL to select
PINCODE INPUT.
3 PushMULTI-CONTROL up or down to
selecta number.
4 PushMULTI-CONTROL left or right to
movethe cursor to the previous or next po-
sition.
5 Afterinputting PIN code (up to 16 di-
gits),press MULTI-CONTROL.
PINcode can be stored in memor y.
Whenyou press MULTI-CONTROL again on
thesame display, the PIN code you entered is
storedin this unit.
Initial Settings
En
48
Section
04