Pioneer P7000BT Introductionof connection and registration, Connecting and disconnecting a cellular phone

#Ifthe difference between the ring volume and
caller’svoice volume is big, overall volume level
maybecome unstable.
#Beforedisconnecting the cellular phone from
thisunit, make sure to adjust the volume to a
properlevel. If the volume is muted (zero level) on
yourcellular phone, the volume level of your cel-
lularphone remains muted even after the cellular
phoneis disconnected.
Notes
!Theequalizer curve for the phone source is
fixed.
!Whenselecting the phone source, you can
onlyoperate FADER (balance adjustment) in
theaudio menu.
!Whenselecting the phone source, the fader
valueis set to FADER :F15 asan initial setting.
Introductionof connection and
registration
1 PressMULTI-CONTROL to display the
mainmenu.
2 UseMULTI-CONTROL to select
CONNECTION.
Theconnection menu is displayed.
Turnto change the menu option. Press to se-
lect.
#Youcan also select this menu by pressing and
holdingPHONE//CONNECT on the ordinary
display.
3 TurnMULTI-CONTROL to select the
function.
PAIREDPHONE (paired phone)—
BTHANDS FREE (new phone)—SET PHONE
(phoneregistration)—DISCONNECT PHONE
(disconnectphone)—DELETE PHONE (delete
phone)
Ifthe phone is not connected and not
paired
Thefollowing function can be operated.
!BTHANDS FREE (new phone)
Ifthe phone is not connected but paired
Thefollowing functions can be operated.
!PAIREDPHONE (pair phone manually)
!BTHANDS FREE (new phone)
!DELETEPHONE (delete phone)
Ifthe phone is connected but not paired
Thefollowing functions can be operated.
!SETPHONE (phone registration)
!DISCONNECTPHONE (disconnect phone)
!DELETEPHONE (delete phone)
Ifthe phone is connected and paired
Thefollowing functions can be operated.
!DISCONNECTPHONE (disconnect phone)
!DELETEPHONE (delete phone)
Notes
!Thedevice name is set to PIONEER FLAP BT
asdefault. You can change the device name
inthe initial setting. Refer to Editing device
nameon page 49.
!PINcode is set to 0000 as the default. You
canchange this code in the initial setting.
Referto Entering PIN code for Bluetooth wire-
lessconnection on page 48.
Connecting and disconnecting
a cellular phone
Usinga cellular phone to initiate a
connection
1 Displaythe connection menu.
Referto Introduction of connection and regis-
trationon this page.
2 UseMULTI-CONTROL to select
BTHANDS FREE.
3 UseMULTI-CONTROL to select a group.
PushMULTI-CONTROL up or down to select a
group.
NOKIA(Nokia)—STANDARD (standard)
#Normallyselect STANDARD. If the device of
Nokiais not paired to this unit, select NOKIA.
#PushMULTI-CONTROL left or right to display
agroup name or an ID.
4 PressMULTI-CONTROL to switch to
PAIREFROM PHONE.
PushMULTI-CONTROL up or down to switch
PAIREFROM PHONE and SEARCH DEVICE.
Operating this unit
En 29
Section
02
Operatingthis unit