07The System Setup menu
4Adjust the level of each channel using the buttons.
If you selected Manual, use to switch speakers. The Auto setup will output test tones in the order shown on- screen:
5b.Channel Level
L
0.0dB
C | [ | 0.0dB ] |
R | [ | 0.0dB ] |
SR | [ | 0.0dB ] |
SBR | [ | 0.0dB ] |
SBL | [ | 0.0dB ] |
SL | [ | 0.0dB ] |
SW | [ | 0.0dB ] |
:Finish
Adjust the level of each speaker as the test tone is emitted.1
5When you’re finished, press RETURN.
You will return to the Manual SP Setup menu.
Tip
• You can change the channel levels at any time by
pressing CH LEVEL then using on the remote control.
Speaker Distance
For good sound depth and separation from your system, you need to specify the distance of your speakers from the listening position. The receiver can then add the proper delay needed for effective surround sound.
1Select ‘Speaker Distance’ from the Manual SP Setup menu.
| 5.Manual SP | Setup |
|
|
| 5c.Speaker | Distance |
| ||||||||
|
| a.Speaker | Setting |
|
| L |
|
|
|
|
|
|
| |||
|
|
|
| 3.0 m | ||||||||||||
|
| b.Channel | Level |
|
| C | [ | 3.0 m | ] |
|
|
|
| |||
|
| c.Speaker | Distance |
|
|
|
| R | [ | 3.0 m ] |
|
|
| |||
|
| d.Bass Peak | Level |
|
|
|
| SR | [ | 3.0 m ] |
|
|
| |||
|
|
|
|
|
|
|
| SBR | [ | 3.0 m ] |
|
|
| |||
|
| f.THX Audio | Setting |
|
| SBL | [ | 3.0 m ] |
|
|
| |||||
|
|
|
|
|
|
|
|
| SL | [ | 3.0 m ] |
|
|
| ||
|
|
|
|
|
|
|
|
| SW | [ | 3.0 m ] |
|
|
| ||
|
|
|
| :Return |
|
| :Finish | |||||||||
|
|
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bass Peak Level
Some audio sources (for example, Dolby Digital and DTS) include
1Select ‘Bass Peak Level’ from the Manual SP Setup menu.
The current setting is displayed. When OFF is displayed the attenuator is off (bass output is not affected).
5.Manual SP | Setup |
|
| 5d.Bass | Peak | Level |
|
| ||||
| a.Speaker | Setting |
|
|
|
|
|
|
|
| ||
|
|
|
| Bass | Peak | Level | :OFF |
| ||||
| b.Channel | Level |
|
|
| [Setting | Start | ] |
| |||
| c.Speaker | Distance |
|
|
| [Setting | Clear | ] |
| |||
| d.Bass Peak | Level |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
| f.THX Audio | Setting |
|
|
|
|
|
|
|
|
| |
|
| :Return |
|
|
| :Return | ||
2 Select a setup option. |
|
|
|
| ||||
| 5d.Bass | Peak | Level |
|
|
| ||
| Bass | Peak | Level | :OFF | ||||
[ | Setting | Start |
| ] |
| |||
|
| [Setting | Clear |
| ] |
| ||
Enter:Setting Start
:Return
•Setting Start – The volume is set to
•Setting Clear – Clears any previous setting and switches limiting off.
3 If you selected ‘Setting Start’, use to adjust the test tones and specify the bass peak level then press
ENTER.
5d.Bass Peak Level
Bass Peak Level
Increase the Bass Peak Level to
a comfortable volume
ENTER:Finish :Cancel
2Adjust the distance of each speaker using the buttons.
You can adjust the distance of each speaker in 0.1 meter increments.
3When you’re finished, press RETURN.
You will return to the Manual SP Setup menu.
Tip
•For best surround sound, make sure the surround back speakers are the same distance from the listening position.
Note
1• If you are using a Sound Pressure Level (SPL) meter, take the readings from your main listening position and adjust the level of each speaker to 75 dB SPL
•The subwoofer test tone is output at low volumes. You may need to adjust the level after testing with an actual soundtrack.
44
En
