
Chapter 2
Installation
This Chapter covers the physical installation of
Requirements
∙Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.
∙TCP/IP protocol must be installed on all PCs.
∙For Internet Access, an Internet Access account with an ISP, and either of a DSL or Cable modem (for WAN port usage)
Procedure
Figure 4: Installation Diagram
1. Choose an Installation Site
Select a suitable place on the network to install
Ensure
2. Connect LAN Cables
∙Use standard LAN cables to connect PCs to the Switching Hub ports on
∙If required, you can connect any LAN port to another Hub. Any LAN port on VRT- 401 will automatically function as an "Uplink" port when required. Just connect any LAN port to a normal port on the other hub, using a standard LAN cable.
6