Physical Details
Front-mounted LEDs
|
| Figure 2: Front Panel |
Power | On - Power on. | |
| Off - No power. | |
Status (Red) | On - Error condition. | |
| Off - Normal operation. | |
| Blinking - This LED blinks during start up. | |
LAN | For each port, there are 2 LEDs | |
| ∙ | LNK/ACT |
|
| ∙ On - Corresponding LAN port is active. |
|
| ∙ Off - No active connection on the corresponding LAN port. |
|
| ∙ Flashing - Data is being transmitted or received via the cor- |
|
| responding LAN port. |
| ∙ | 100 |
|
| ∙ On - Corresponding LAN port is using 100BaseT. |
|
| ∙ Off - Corresponding LAN port connection is using 10BaseT, |
|
| or no active connection. |
WAN | On - Connection to the modem attached to the WAN (Internet) port | |
| is established. | |
| Flashing - Data is being transmitted or received via the WAN port. | |
PPPoE | On - PPPoE connection established. | |
| Off - No PPPoE connection. | |
DMZ | ∙ | LNK/ACT |
|
| ∙ Blinking – receiving/ transmitting data |
| ∙ | 100 |
|
| ∙ On - Link at 100Mbps |
|
| ∙ Off - Link at 10Mbps |
4
