Planet Technology VRT-401 Access Control, Firewall Rules, Timezone, Mail Logs Send E-mail alert

	Security Configuration
Access Control	If enabled, the log will include attempted outgoing connec-
	tions which have been blocked by the "Access Control"
	feature.
Firewall Rules	If enabled, the log will details of packets blocked by user-
	defined Firewall rules. Logging can be set for each rule
	individually. Only rules which have logging enabled will be
	included.
VPN	If enabled, the VPN log will record incoming and outgoing
	VPN connections.
Timezone	Select the correct Timezone for your location. This is re-
	quired for the date/time shown on the logs to be correct.
E-Mail Logs
Send E-mail alert	If enabled, an E-mail will be sent immediately if a DoS
	(Denial of Service) attack is detected. If enabled, the E-mail
	address information must be provided.
E-mail Logs	You can choose to have the logs E-mailed to you, by ena-
	bling either or both checkboxes. If enabled, the Log will sent
	to the specified E-mail address. The interval between E-
	mails is determined by the "Send" setting.
Send	Select the desired option for sending the log by E-mail.
	∙ When log is full - The time is not fixed. The log will be
	sent when the log is full, which will depend on the vol-
	ume of traffic.
	∙ Every day, Every Monday ... - The log is sent on the
	interval specified.
	∙ If "Every day" is selected, the log is sent at the time
	specified.
	∙ If the day is specified, the log is sent once per
	week, on the specified day.
	∙ Select the time of day you wish the E-mail to be
	sent.
	∙ If the log is full before the time specified to send it, it
	will be sent regardless of the day and time speci-
	fied.
E-mail Address	Enter the E-mail address the Log is to be sent to. The E-
	mail will also show this address as the Sender's address.
Subject	Enter the text string to be shown in the "Subject" field for the
	E-mail.
SMTP Server	Enter the address or IP address of the SMTP (Simple Mail
	Transport Protocol) Server you use for outgoing E-mail.
Port No.	Enter the port number used to connect to the SMTP Server.
	The default value is 25.
Syslog Server
Enable Syslog	If enabled, log data will be sent to your Syslog Server.
Syslog Server	Enter the IP address of your Syslog Server.

63