Planet Technology VRT-401 user manual Data Access Control Screen

VRT-401 User Manual

Data - Access Control Screen

Group

Group	Select the desired Group. The screen will update to display
	the settings for the selected Group. Groups are named "De-
	fault", "Group 1", "Group 2", "Group 3" and "Group 4", and
	cannot be re-named.
"Members" Button	Click this button to add or remove members from the current
	Group.
	∙ If the current group is "Default", then members can not be
	added or deleted. This group contains PCs not allocated
	to any other group.
	∙ To remove PCs from the Default Group, assign them to
	another Group.
	∙ To assign PCs to the Default Group, delete them from the
	Group they are currently in.
	See the following section for details of the Group Members
	screen.
Internet Access
Restrictions	Select the desired options for the current group:
	∙ None - Nothing is blocked. Use this to create the least
	restrictive group.
	∙ Block all Internet access - All traffic via the WAN port is
	blocked. Use this to create the most restrictive group.
	∙ Block selected Services - You can select which Services
	are to block. Use this to gain fine control over the Internet
	access for a group.
Block by Schedule	If Internet access is being blocked, you can choose to apply
	the blocking only during scheduled times. (If access is not
	blocked, no Scheduling is possible, and this setting has no
	effect.)
Services	This lists all defined Services. Select the Services you wish to
	block. To select multiple services, hold the CTRL key while
	selecting. (On the Macintosh, hold the SHIFT key rather than
	CTRL.)
Buttons
Members	Click this button to add or remove members from the current
	Group.
	If the current group is "Default", then members can not be
	added or deleted. This group contains PCs not allocated to
	any other group.
	See the following section for details of the Group Members
	screen.
Save	Save the data on screen.
Cancel	Reverse any changes made since the last "Save".

54