Planet Technology VRT-401 Obtain an IP address from a Dhcp Server, Specify an IP Address

VRT-401 User Manual

Figure 13: Windows NT4.0 - IP Address

3.Select the network card for your LAN.

4.Select the appropriate radio button - Obtain an IP address from a DHCP Server or Specify an IP Address, as explained below.

Obtain an IP address from a DHCP Server

This is the default Windows setting. Using this is recommended. By default, VRT- 401 will act as a DHCP Server.

Restart your PC to ensure it obtains an IP Address from VRT-401.

Specify an IP Address

If your PC is already configured, check with your network administrator before making the following changes.

1.The Default Gateway must be set to the IP address of VRT-401. To set this:

∙Click the Advanced button on the screen above.

∙On the following screen, click the Add button in the Gateways panel, and enter VRT-401’s IP address, as shown in Figure 14 below.

∙If necessary, use the Up button to make VRT-401 the first entry in the Gate- ways list.

20