Other Features and Settings
Remote Administration
This feature allows you to manage
Figure 92: Remote Administration Screen
Data - Remote Administration Screen
Remote Administration
Enable Remote | Enable to allow administration via the Internet. If Disabled, this |
Administration | device will ignore management connection attempts from the |
| Internet. |
Port Number | Enter a port number between 1024 and 65535 (8080 is rec- |
| ommended). This port number must be specified when you |
| connect (see below). |
| Note: The default port number for HTTP (Web) connections is |
| port 80, but using port 80 here will prevent the use of a Web |
| "Virtual Server" on your LAN. (See Advanced Internet - Virtual |
| Servers) |
|
|
Current | You must use this IP Address to connect (see below). |
IP Address | This IP Address is allocated by your ISP. But if using a Dy- |
| |
| namic IP Address, this value can change each time you |
| connect to your ISP. So it is better if your ISP allocates you a |
| Fixed IP Address. |
To connect from a remote PC via the Internet
1.Ensure your Internet connection is established, and start your Web Browser.
2.In the "Address" bar, enter "HTTP://" followed by the Internet IP Address of VRT- 401. If the port number is not 80, the port number is also required. (After the IP Address, enter ":" followed by the port number.)
e.g.
HTTP://123.123.123.123:8080
This example assumes the WAN IP Address is 123.123.123.123, and the port number is 8080.
111