THE PERFECT FIT
Accessories
Wear Strips
To avoid excessive tunnel wear, tunnel wear strips must be installed whenever track studding is used. Several wear strips are available. See your dealer for more information.
Some models are manufactured with tunnel wear strips or wear strip coolers installed. Refer to your Owner’s Manual Supplement to determine if your model has wear strips.
Wear strips are designed for a specific stud length. See your dealer’s studding chart for recommended traction accessories.
Components as viewed from the rear of the track:
1Top of tunnel
2Wear strip
3Track
4Wearstrip mounting holes
1
2
4
3
CAUTION
Studs longer than 1″ (2.5 cm) on machines equipped with center coolers will cause center cooler damage.
Whenever wear strips are relocated, be sure there’s adequate stud clearance to the heat exchangers. Lack of clearance may result in damage to heat exchangers.
63
