MAINTENANCE
Lubrication
Jackshaft Bearing Greasing
Loosen the driven clutch retaining bolt and pull the clutch outward to expose the bearing and grease fitting. Inject grease into the grease fitting in the flangette until grease purges from inside or outside the bearing seal (may take only two pumps). Push the clutch back onto the shaft and replace the clutch retaining bolt. Torque to 18 ft. lbs. (2.48 kg/m).
Driveshaft Bearing Greasing
Inject grease into the fitting on the speedometer drive adaptor until grease purges from inside or outside the bearing seal (approximately two pumps).
Coupler Greasing - WideTrak
Grease the couplers on the |
| |
driveshaft and jackshaft. |
| |
Grease points are indicated |
| |
by a +. |
| |
1. | Jackshaft | 1 |
2. | Driveshaft |
|
3. | Transmission |
|
+ +
+
+
+
3
2
107
