MAINTENANCE
General Maintenance
Hydraulic Brake Inspection
Frequently inspect |
|
|
|
| |
the brake lever |
|
|
reserve. Firmly |
|
|
depress the brake | A | |
lever and measure |
|
|
the clearance |
|
|
between the lever |
|
|
and handlebar grip. |
|
|
|
| |
This distance, |
|
|
called brake lever |
|
|
|
| |
reserve (A), should be no less than 1/2″ (1.3 cm).
Brake pads must be replaced when the brake pad material becomes thinner than the backing plate (approximately 1/16″). A kit is available for replacing brake pads. See your dealer.
WARNING
Properly functioning brakes are vital to your safety. Be sure the brake pads do not drag on disc and that brake lever travel is not excessive.
Brake pads must be replaced when the brake pad material becomes thinner than the backing plate (approximately 1/16″).
124
