Repair Manual | Macro 5 SLR Camera |
|
|
Grid Adjustment
Note: Make sure the range lights are properly adjusted before adjusting the camera grid.
1.Take a picture of the test target.
2.Using a felt tip pen, draw diagonal lines from
CorrectIncorrect
Figure 3-4 Grid Position
Notes: • If the diagonal lines intersect in the center of the grid pattern, no adjustment is needed.
•If the diagonal lines do not intersect in the center of the grid pattern, proceed to step 3 and adjust the position of the grid as needed.
3.Manually adjust the position of the grid as follows:
•If applicable, remove the front cover as explained in section 5 of this service manual.
•Turn the applicable adjustment screw (Figure
4.Repeat steps 1 through 4 until the grid is properly centered.
31