Repair Manual | Macro 5 SLR Camera |
|
|
2.Reassembly
a.Place the new the S1/S2 PC board onto its right hand grip support mounts.
Note: Make sure the large end of the S1 button spring is inserted into the S1 button before the S1/S2 PC board is placed onto its support mounts.
b.Using a torx driver, install and tighten the four (4) screws that secure the S1/S2 PC board to its right hand grip support mounts.
c.Connect electrical cable J19 to the logic PC board.
d.Using a small
e.Install the left/right cover assembly as explained on page 42.
54
