Repair Manual | Macro 5 SLR Camera |
|
|
2.Reassembly
a.Place the bottom cover onto the camera back making sure that its two (2) alignment holes properly align with the support posts on the camera back..
b.Using a torx driver, install and tighten the three (3) screws securing the bottom cover to the camera back.
c.Install the camera back door.
Note: Refer to the user's guide for instructions on how to install the camera back door.
d.Install the rear cover as explained on page 46.
e.Install the left/right cover assembly as explained on page 42.
48
