Repair Manual | Macro 5 SLR Camera |
|
|
Shutter Solenoid Assembly
1.Removal (Figure 5-14)
a.Remove the left/right cover assembly as explained on page 39.
b.Disconnect the solenoid cable wires from the solenoid pins.
c.Using tweezers, disconnect the shutter extension spring from the shutter pivot post.
d.Using a torx driver, remove the two (2) screws securing the solenoid assembly to the viewfinder housing.
e.Lift out the solenoid assembly being careful not to lose the solenoid plunger.
Solenoid
Extension
Spring
Figure 5-14 Shutter Solenoid Assembly
67
