Polaroid FLM-3201 Programming the Polaroid Universal Remote Control, Direct Programming Setup

Models: FLM-3201

1 60
Download 60 pages 60.02 Kb
Page 45
Image 45
Programming the Polaroid Universal Remote Control

Programming the Polaroid Universal Remote Control

Following are two sets of instructions for programming your Polaroid Universal Remote Control to work with other devices in addition to your Polaroid TV. (If you only wish to use

the remote control with your Polaroid TV, no additional programming is necessary.) Begin with the Direct Programming Setup, and if unsuccessful, go on to the Auto Code Search Setup.

Direct Programming Setup

This method requires use of one of the device codes found in the Device Code Table

(see last paqes of your Operatinq Manual). Begin with the first code listed for your device.

1 Turn the device power off and point the Polaroid Universal Remote Control at the device you wish to control.

2 Momentarily press a device button on the Polaroid Universal Remote Control (TV, DVD, CBL, or AUX). When you release the device button the red LED at the top of the remote will blink once.

Note: For devices other than a TV, DVD, or Cable Box, use the AUX key.

3 Press and hold the SET button (top-left button) until you see the LED blink once, followed by two short blinks. Release the SET button after you see the two short LED blinks.

4 Enter the 5-digit code from the code table for the device you want to control. The LED blinks once each time you press a numbered button. After you enter the last digit:

a)If the code you entered is the correct code for your device, you will see the LED blink twice. Go to step 5.

b)If the code you entered is not the correct code for your device, you will see the LED blink once. Repeat steps 2-4, this time choosing the next code in the list.

5 Press the Power button (top right-side button) on the remote and your device power should turn on. If the power does not turn on, repeat the entire procedure beginning with step 1.

If you are unable to program the remote properly after two or more attempts using the Direct Programming Setup, go on to the Auto Code Search Setup.

42

Page 45
Image 45
Polaroid FLM-3201 manual Programming the Polaroid Universal Remote Control, Direct Programming Setup