Polycom 6000 manual Placing Calls from Phones that are in the Logged Out State

Polycom SoundStation IP 6000 Phone User Guide

To log out of a phone:

1.From the idle screen, do one of the following:

— Press the Log out soft key.

or

— Press , and then select Features > User Login > Log out.

2.To confirm, press the Yes soft key.

Your personal profile is no longer accessible, and the phone displays either the User Login screen for the next user login, or the default phone profile for anonymous users.

Placing Calls from Phones that are in the Logged Out State

If a phone doesn’t require a user login, you can use the phone to place calls to any number, even though the phone may be in the logged out state. If a phone requires a user login, you can place calls to authorized numbers when the phone is in the logged out state. These numbers are set up by your administrator. You won’t be able to call any other numbers until you log in to the phone.

To place a call to an authorized number from a phone in the logged out state:

1.Press the New Call soft key.

2.From the Place an Authorized Call screen, select the number you want to call, and then press the Dial soft key.

Changing Your Login Password

You can change your password from any phone that you’re logged in to.

Note	By default, login passwords are factory preset to the numerals 123. Your
	administrator can change this default password if needed. Polycom recommends
	that you change your password when you first log in to a phone. Your user ID is
	managed only by your administrator, meaning you cannot change it yourself.

To change your login password:

1.Log in to any phone on your network.

2.From the idle screen, press , and then select Features > User Login > Change User Login Password.

3.From the Change User Login Password screen, enter your old password, enter a new password and confirm it, and then press the Enter soft key.

Your password is changed. The next time you log in to a phone, you’ll need to enter this password.

4 - 18