Installation
Selecting an Installation Option
You are now ready to install the Prestige 6000. Use the following flow chart to decide which installation option is right for you.
Do you have an | Yes | See “UPS with | |
Optional PPDM | |||
optional PPDM? |
| Installation” | |
|
|
| on page 37. |
| No |
|
|
|
|
| |
|
|
| |
|
|
|
|
|
|
|
|
|
| Yes | See “UPS |
Is the PPU | Hardwired | ||
hardwired? |
| Installation” | |
|
|
| on page 29. |
|
|
|
|
No
See “UPS Plug/Receptacle Installation” below.
UPS and Battery Cabinet Installation
This section describes the installation and startup for a plug/receptacle UPS and a hardwired UPS.
UPS Plug/Receptacle Installation
Use the following procedure to install the PPU and battery cabinets:
1.Place the UPS near the equipment to be protected. The UPS should be well ventilated and away from direct sunlight or other heat source.
Place the PPU underneath or beside the battery cabinets as shown in Figure 3.
24 | Powerware® 9 Prestige Series User’s Guide (4500/6000 VA) S Rev H www.powerware.com |