Communication
Z > Set Baud Rate allows you to select a new baud rate. The Select
Baud Rate Menu displays a list of baud rate options.
|
| SELECT BAUD RATE |
2 | > | 300 |
4 | > | 1200 |
5 | > | 2400 |
6 | > | 4800 |
7 | > | 9600 |
8 | > | 19200 |
Q | > | QUIT THIS MENU |
ENTER SELECTION
5.To save the configuration settings, type S at the Main Menu prompt. The UPS operates and communicates under the new configuration, and defaults to these settings each time it is started.
If you want to abandon the selections you have made, type Q to quit.
NOTE Any changes you make to the UPS communications configuration must correspond to the communications equipment you are using. In particular, new baud rate selections for the UPS must match your communications equipment.
Power Management Software
Power management software allows you to monitor UPS operations automatically. To use OnliNet or LanSafe software, the UPS must be configured for any one of the Data Dump, Terminal, or Printer modes; however, Printer mode is preferred.
OnliNet provides multiple levels of UPS monitoring and control, as well as automatic shutdown for many different operating systems. If you have any questions or would like further information, call the Help Desk at one of the telephone numbers on page 78.
Powerware® 9 Prestige Series User’s Guide (4500/6000 VA) S Rev H www.powerware.com | 65 |