Installation
Voltage
Selector
Switch
Figure 15. Voltage Selector Switch
5.Plug the input and output power cords of the PPDM into the input and output power connectors on the PPU rear panel (see Figure 13 and Figure 14). Figure 24 on page 55 shows the PPDM and PPU rear panel connections.
6.For a plug/receptacle PPDM, continue to Step 7. For a hardwired PPDM, skip to Step 8.
7.The equipment to be protected by the UPS should be powered off. Plug the equipment into the power output receptacles on the PPDM rear panel. Skip to Step 13 on page 46 to connect the battery cabinet(s).
DO NOT protect laser printers with the UPS because of the exceptionally high power requirements of the heating elements.
42 | Powerware® 9 Prestige Series User’s Guide (4500/6000 VA) S Rev H www.powerware.com |