Powerware 4500, 6000 manual 52

Installation

9.Hardwire the input (TB1) and output terminations (TB2) for the PPDM. See the following hardwired terminations table for specifications. See Figure 17 for a detailed view of the terminal blocks.

PPDM Hardwired Terminations

	Wire Function		Terminal	Terminal Wire	Suggested Wire	Conduit Connection
			Position	Size Rating	Size*	(Entry Size)
Input		L1	TB1-1	8 - 18 AWG		1 1/8I (28.58 mm)
		L2/Neutral	TB1-2	(10 - 0 mm2)	10 AWG	access hole for
					(6 mm2)	3/4I (19.05 mm)
		Ground	TB1-3	10 - 18 AWG
						conduit
				(6 - 0 mm2)
Output		Model and Voltage	TB2-3
		Dependent (see the
			TB2-2			1 3/8I (34.93 mm)
		following Output		6 - 18 AWG	8 AWG
						access hole for
		Wiring Table)	TB2-1
				(16 - 0 mm2)	(10 mm2)	1I (25.4 mm)
		Neutral	TB2-4			conduit
		Ground	TB2-5

*Use 75°C copper wire. Suggested wire size is based on Model 240: 120/240 hardwire full load ratings applied to NEC Code Table 310-16.

PPDM Hardwired Models Output Wiring

Model 208:120/208		Model 240:120/240		Model 240:120/240E
Output Voltage	Terminal Position	Output Voltage	Terminal Position	Output Voltage	Terminal Position
120V	TB2-2 and TB2-4		TB2-2 and TB2-4
(50/60 Hz)		100V, 110V,		100V, 110V,
	and/or		and/or		TB2-3 and TB2-4
127V		115V, or 120V		115V, or 120V
	TB2-3 and TB2-4		TB2-3 and TB2-4
(60 Hz only)
208V
(50/60 Hz)	TB2-1 and TB2-3	200V, 220V,	TB2-2 and TB2-3	200V, 220V,	TB2-1 and TB2-4
220V		230V, or 240V		230V, or 240V

(60 Hz only)

44 Powerware® 9 Prestige Series User’s Guide (4500/6000 VA) S Rev H www.powerware.com