INSTALLING OPTIONS

8.Secure the Powerware Hot Sync CAN Bridge Card with the screws removed in Step 2.

9.On the bottom cover (and also the middle cover if 3-high), remove a knockout tab in the top edge of the cover for each cable:

With wire cutters, cut either side of the tab and twist down to remove the tab (see Figure 20).

Figure 20. Removing Knockout Tabs

10.Route the cable(s) to the approximate location of the cover access holes.

28

EATON Powerware® 9155 Parallel UPS (8–15 kVA) User’s Guide S 164201592 Rev C www.powerware.com