Battery Cabinet Installation
Entrance Panel
Battery Cable
Figure 13. UPS Power Entrance Panel
3.Use a pair of pliers to bend the narrow links (1 and 2 in Figure 14) between the outer edge of the lower breakaway panel and the rear panel.
4.Use the pliers to bend the entire breakaway panel (at 3 and 4 in Figure 14) until it breaks away.
1 4
2 3
Figure 14. Breakaway Panel Links
5.Verify all hazardous voltages have been removed from the backplane by testing with a voltmeter or other test device.
18 | Powerware® 9170 User's Guide |