Battery Cabinet Installation

￿

+

Figure 17. Battery Cable Installed in Battery Cabinet

17.Secure the +, the ￿, and the conductors to the proper compression lugs on the battery cabinet backplane as shown in Figure 17. Torque all three compression lugs to 75￿85 in lb (8.5￿9.6 Nm).

18.If an additional battery cabinet will be connected to the first, in a daisy-chain configuration, use another external battery cabinet cable assembly for the connections between the battery cabinets.

19.Locate the daisy-chained cable on the rear of the first battery cabinet in the section below the location of the first cable assembly. Follow this procedure for connecting any additional daisy-chained battery cabinets.

20.Install the remaining cabinet rear panels using the original screws.

21.If your UPS is a hardwired unit, continue to •Electrical Installation" on page 23. If you have a plug-receptacle unit, skip to •UPS Startup" on page 49.

Powerware® 9170 User's Guide ￿ LTM-1344 B Uncontrolled Copy

21