UPS Startup

Initial Startup Parameters

The first time the UPS is turned on, you must set or verify certain operating parameters before placing the UPS into operation. Use the following procedure to set these initial configuration parameters.

1.Enter the correct user security password: 0377. Move left and right by pressing the buttons below the <- and -> on the display. To change the value of the selected digit, press the ￿ and ￿ buttons. When the password shows 0377, press the button.

ENTER PASSWORD

Password ± 0000

<± ±> ESC

2.Select the desired language for the display. Use the ￿ and ￿ buttons to scroll between English, French, German, and Spanish. Enter your selection by pressing the button.

3.Set the clock for the local time and date. If the time or the date is correct as displayed, press the button to advance to the next configuration setting. Time must be entered in 24-hour format.

Press the <- and -> buttons to move left and right. Press the ￿ and ￿ buttons to increase or decrease the value of each selected digit. When the displayed value is correct, press the button.

Set Time

time 14:51:38

<± ±> ESC

56

Powerware® 9170 User's Guide ￿ LTM-1344 B Uncontrolled Copy