Electrical Installation
If a bypass switch is not used, the UPS input may be hardwired through conduit to a main power source circuit breaker, and the UPS output may either be hardwired to a circuit breaker in a distribution panel (as shown in Figure 19) or supplied to loads through receptacles on the back of the UPS. Without a bypass switch, power to the load cannot be maintained if the UPS is taken completely offline.
|
|
|
|
|
|
|
|
|
|
|
| Building |
|
|
|
|
|
|
| Load |
|
| Service |
|
|
|
|
|
|
| Distribution |
|
| Panel |
|
|
|
|
|
|
| Panel |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(If Required) External Batteries
(Optional)
Figure 19. Typical Installation without a Bypass Switch
Powerware® 9170 User's Guide | 25 |