152
Public Space Parameters
Figure 5-35 Login Screen with Custom Logo
Follow these steps to add your own partner image and logo to the AP:
1. Create the image files that you want to add to the login pages. Keep in mind the following:
• The file should in JPG or a GIF format.
• The file name cannot exceed 8 characters (DOS 8+3 format).
• The logo image (that is, the logo that appears on each login screen) should not be too large. The
recommended size is approximately 125 pixels wide by 40 pixels high.
• The partner image for the connecting screen can be larger than the logo image.
• For each file, you may want to try out multiple image sizes before you settle on one particular size.
2. Copy the image files to your TFTP server’s root directory.
3. Login to the AP’s Web browser interface.
4. Click Commands > Download.
5. Use the Download command to download the image files to the AP.
• Enter the file name in the File Name field. Remember that the name cannot exceed 8 characters (not
including the extension).
• The File Type is Generic.
6. Click Subscriber > Messages > Login Msgs.
7. Enter the name of logo image you downloaded to the AP in the Image File Name field.
8. Place a check mark in the Enable Partner Image box.
9. Enter the file name of the partner image you downloaded to the AP in the Partner Image File Name field.
10. Click OK.
11. Reboot the AP.