205
Using the Command Line Interface

Parameter Tables

Objects contain groups that contain both parameters and parameter tables.
Use the following Tables to configure the Access Point. The Access Point CLI is under development as this document
is being prepared; therefore, some table cells are blank where a feature has not yet been implemented or information
needs validation. Columns used on the tables include:
Name - Parameter, Group, or Table Name
Type - Data type
Values - Value range, and default value, if any
ACC. - Indicates access type. R = Read Only (show), RW = Read-Write, can be "set", W = Write Only
CLI Parameter - Parameter name as used in the Access Point
Access Point network objects are associated with Groups. The network objects are listed below and associated
parameters are described in the following Parameter Tables:
System Parameters - Access Point system information
Miscellaneous System Parameters
Inventory Management Information
Network Parameters - IP, DHCP, DNS and VLAN configuration
DHCP Server Parameters
DNS Parameters
VLAN Parameters
Interface Parameters - Wireless and Ethernet configuration
Wireless 802.11b Parameters (including WDS)
Wireless 802.11a Parameters
Ethernet Interface Parameters
Management Parameters - Control access to the AP-2500’s management interfaces and set the time
SNMP Parameters
SNMP Table Host Table Parameters
Telnet Parameters
Serial Port Parameters
HTTP (web browser) Parameters
TFTP Server Parameters
NTP Parameters
Security Parameters - Access Point security settings and RADIUS configuration
RADIUS Server Parameters
Encryption Parameters
VPN
AAA Parameters - Configure Authentication, Authorization and Accounting (AAA) settings
Basic AAA Parameters
AAA External Authorization Parameters
AAA Internal Authorization Parameters
Logging Parameters - System and AAA Logging
URL Filtering Parameters - Prevent subscribers from accessing specified Web sites
URL Filtering IP Table
URL Filtering DNS Table
ICC (Information Control Console) Parameters - Configure the Information and Control Console
ICC Button Configuration
ICC Banner Configuration
SMTP Parameters - Enable redirection of outgoing e-mails