Q-Logic SANBOX2 manual Table of Contents

Table of Contents

Section 1	Introduction
1.1	Intended Audience	1-1
1.2	Related Materials	1-2
1.3	Technical Support	1-2
1.3.1	Availability	1-2
1.3.2	Training	1-2
1.3.3	Contact Information	1-3

Section 2	SNMP Overview
2.1	SNMP Interface Objectives	2-1
2.2	Manager and Agent	2-1
2.3	Traps	2-2
2.4	Management Information Base	2-3
2.5	User Datagram Protocol	2-3
2.6	Numbering System Conventions	2-4
Section 3 Configuring a Switch
3.1	System Specifications and Requirements	3-1
3.2	Configuring a Switch Using the Command Line Interface	3-1
3.3	Configuring a Switch Using SANsurfer Switch Manager	3-3
Section 4 MIB-II Objects
4.1	Groups in MIB-II	4-1
4.2	System Group	4-1
4.3	The Interfaces Group	4-5
4.4	The Interfaces Table	4-6
4.5	The Address Translation Group	4-13
4.6	The IP Group	4-15
4.7	The IP Address Table	4-21
4.8	The IP Routing Table	4-23
4.9	The IP Address Translation Table	4-30
4.10	Additional IP Objects	4-32
4.11	The ICMP Group	4-32
4.12	The TCP Group	4-40
4.13	The TCP Connection Table	4-45
4.14	Additional TCP Objects	4-47
4.15	The UDP Group	4-48

59047-03 B Page iii