6 – Fabric Element MIB Objects
A
6.6
FxPort Physical Level Table
The objects described in this section are in table format indexed by switch index and port index. An example of how to access one of these objects is: "snmpget localhost public fcFxPortPhysAdminStatus.1.1". This table contains one entry for each FxPort in the Fabric Element, the physical level status, and parameters of the FxPorts.
This table contains one entry for each FxPort in the Fabric Element, and the physical level status and parameters of the FxPorts.
fcFxPortPhysAdminStatus (1.3.6.1.2.1.75.1.2.2.1.1)
The desired state of the FxPort. A management station may place the FxPort in a desired state by setting this object accordingly. The testing(3) state indicates that no operational frames can be passed. When a Fabric Element initializes, all FxPorts start with fcFxPortPhysAdminStatus in the offline(2) state. As the result of either explicit management action or per configuration information accessible by the Fabric Element, fcFxPortPhysAdminStatus is then changed to either the online(1) or testing(3) states, or remains in the offline state.
Syntax
INTEGER {
online(1), - place port online offline(2), - take port offline testing(3) - initiate test procedures
}
Access
Status
current
Return Value
Refer to Table
Table 6-4. fcFxPortPhysAdminStatus Read Return Values
Port | Value |
|
|
Online | online (1) |
Offline | offline (2) |
Diagnostics | testing (3) |
Down | offline (2) |
|
|
