Q-Logic SANBOX2 manual Groups in MIB-II, System Group, MIB-II Groups

Section 4

MIB-II Objects

This section covers the implementation details for the MIB-II on the SANbox/ SANbox2 switch. A MIB defines the properties of the managed object within the device to be managed. Every managed device keeps a database of values for each definition written in the MIB. It is not the actual database itself; it is implementation dependant. Definition of the MIB conforms to the SMI given in RFC 1155. The latest Internet MIB is given in RFC 1213, and is sometimes called MIB-II.

4.1

Groups in MIB-II

Refer the Table 4-1for the syntax for MIB-II Groups.

	Table 4-1. MIB-II Groups
Group	Syntax
system	OBJECT IDENTIFIER ::= { mib-2 1 }
interfaces	OBJECT IDENTIFIER ::= { mib-2 2 }
at	OBJECT IDENTIFIER ::= { mib-2 3 }
ip	OBJECT IDENTIFIER ::= { mib-2 4 }
icmp	OBJECT IDENTIFIER ::= { mib-2 5 }
tcp	OBJECT IDENTIFIER ::= { mib-2 6 }
udp	OBJECT IDENTIFIER ::= { mib-2 7 }
snmp	OBJECT IDENTIFIER ::= { mib-2 11 }

4.2

System Group

Implementation of the System group is mandatory for all systems. If an agent is not configured to have a value for any of these variables, a string of length 0 is returned.

59047-03 B 4-1