A
5 – Fibre Alliance MIB Objects
Return Value
Returns the Port World Wide Name followed by 8 bytes of zeros. For example, the return value for port #2 would be 20 02 00 C0 DD 00 71 C9 00 00 00 00 00 00 00 00, and the return value for port #2 would be 20 0E 00 C0 DD 00 71 C9 00 00 00 00 00 00 00 00. If a port is configured as a Donor, return value = 0.
connUnitPortFCId (1.3.6.1.3.94.1.10.1.11)
This is the assigned Fibre Channel ID of this port. This value is expected to be a Big Endian value of 24 bits. If this is a loop, then it is the ALPA that is connected. If this is an E_Port, then it will only contain the domain ID left justified, zero filled. If this port does not have a Fibre Channel address, returns all bits set to 1.
Syntax
FcAddressId
Access
Status
mandatory
Return Value
The address for each port based on Domain, Area, and ALPA. For example, port #15 would be equal to 640F00 (Domain = 0x64, Area = 0x0F, ALPA = 0x00).
connUnitPortSn (1.3.6.1.3.94.1.10.1.12)
The serial number of the unit. If not applicable, returns an empty string.
Syntax
DisplayString (SIZE(0..79))
Access
Status
unsupported
Return Value
Always returns error status "NoSuchName".
