A
5 – Fibre Alliance MIB Objects
connUnitUrl (1.3.6.1.3.94.1.6.1.10)
URL to launch a management application, if applicable. Otherwise, it’s an empty string. In a standalone unit, this would be the same as the
Syntax
DisplayString
Access
Status
mandatory
Return Value
The switch IP address. For example, http://10.0.0.1. Writes not supported, returns 'NoSuchName".
connUnitDomainId (1.3.6.1.3.94.1.6.1.11
24 bit Fibre Channel address ID of this connectivity unit, right justified with leading zeros if required. This should be set to the Fibre Channel address ID, or if it is a switch, it would be set to the Domain Controller address. If this value is not appli- cable, return all bits set to one.
Syntax
OCTET STRING (SIZE(3))
Access
Status
mandatory
Return Value
The domain controller address. For example, FF FC 65.
