QSD42908 User’s Manual
Select Channel
In PTZ control mode, you can press numeric keys to select channel. For example; press【2】key to select the PTZ camera on channel 2.
After you select the PTZ camera, you can use the control keys to control it.
PTZ Control Keys Description
Direction control keys: | 【↑】,【↓】,【←】,【→】; |
ZOOM control keys: | |
FOCUS control keys: | |
IRIS control keys: | |
Adjust preset keys: | 【REC/SHOT】; |
Auto control key: | 【PLAY/AUTO】; |
Wiper control key: | 【WIPER/MENU】; |
Light control key: | 【LIGHT/F1】; |
Auxiliary device control key:【AUX/F2】
Adjust Preset Description
In PTZ control mode, press【REC/SHOT】key, and press the preset number (three numeric keys), DVR will adjust the corresponding preset number. Repeat pressing 【REC/SHOT】key, and press the preset number, DVR will adjust that preset number.
When you exit PTZ control mode, the camera will stay at the current position.
Note: The PTZ preset number is set already. Please refer to PTZ menu for preset setup. Current firmware can support up to 128 presets.
Start/Stop Auto in PTZ Control Mode
In PTZ control mode, press【PLAY/AUTO】key to start PTZ auto function. Press
【PLAY/AUTO】key again to stop.
When PTZ is in auto mode, if you exit PTZ control mode, PTZ will continue auto function unless you enter into PTZ control mode again, and press
【PLAY/AUTO】key to stop.
24
