QSD42908 User’s Manual
5.4Video Output Standard and VGA Setup
Video output standard
There is one VOUT BNC connector on the rear panel of the DVR. It is used to connect with an analog monitor and can support PAL or NTSC video output. You can modify the video output standard to match video input.
In “Display” menu: There is a list box named “Video Output Standard”, you can
use【á】【â】key to select PAL or NTSC video output.
VGA setup
There is one VGA interface on the rear panel of the DVR. You can use it to connect with a VGA display. You can define VGA resolution and refresh frequency in the “Display” menu.
The following options are available: 1280*1024/60Hz,1024*768/60Hz,
800*600/60Hz. You can use【á】【â】keys to select.
Press “Confirm” button to save or “Cancel” to abort.
5.5 Camera name and OSD (On Screen Display) Setup
Camera Name
In “Camera” menu, you can input a name for each camera. See fig 5.9 Please note that a camera’s name can not be copied.
Fig 5.9 Input camera number
40
