![](/images/new-backgrounds/1224998/22499823x1.webp)
QSD42908 User’s Manual
| 15 | Reserved |
|
|
|
|
|
|
|
| 16 | F1 | Same as【F1】key of front panel. |
|
|
|
|
|
|
| 17 | Lens control | IRIS, FOCUS ZOOM for lens |
|
| control. |
| ||
|
|
|
| |
| 18 | F2 | Same as【F2】key of front panel. |
|
|
|
|
|
|
Loading the batteries into the IR controller
1.Remove the battery cover.
2.Insert the battery. Make sure that the poles (+ and
3.Replace the battery cover.
Starting the Remote Control
Press【DEV】key, input the DVR device ID (default is “88”, can be changed in
“Display” menu) and then press the【ENTER】key. If the “STATUS” light of the DVR front panel is green, it means you can use the remote control to operate the DVR.
Disabling the Remote Control
When the remote control status is on, press【DEV】key again, the “STATUS” light will turn off. Then the remote control can not control the DVR.
Powering Down the DVR
When the remote control status is on, press【POWER】key for several seconds, the DVR will be powered off.
If Remote Control Does Not Work
•Check pole positions of batteries.
•Check the remaining charge in the batteries.
•Check to see if the sensor is blocked.
•If the problem still exists, please contact Administrator.
12