R
Cumberland Gap Wood Stove
B.Reversible Flue Collar and Horizontal Flue Heat Shield
Tools Required: Phillips head screwdriver; 3/8" and 7/16" wrench
The flue collar is reversible for either a top or rear venting installation. The appliance is shipped with the flue collar in the top vent position.
REQUIRED PARTS FOR REAR INSTALLATION:
•Baffle Diverter: Shipped with appliance located inside firebox
•Horizontal Flue Heat Shield, Part
Converting Collar For Rear Vent Installation
and
Installing Required Horizontal Flue Shield
Remove cast top
Remove bolts and
rotate flue collar
Discard heat shield
Rear Heat
Shield
Remove 4 screws and set rear shield & screws aside
Figure 13.1
1.Lift off cast top. Remove 4 Phillips head screws from the heat shield. Discard heat shield and save the screws.
Figure 13.1.
2.Remove 4 Phillips head screws from the rear shield, 2 on each side, lift shield off and set aside. Figure 13.1.
3.Remove 1 bolt from each side of the flue collar and retrieve nuts attached to bolts. Use 3/8" and 7/16" wrenches. Figure 13.1.
4.Turn vent to horizontal position. Inspect sealant to ensure a leak free application.
5.
6.Attach required accessory Horizontal Flue Shield with 2 of the screws removed in Step #1 and secure in place.
7.Follow instructions for placing the Baffle Diverter on pages 14 & 15.
8.Place cast top on the unit. See Figure 13.3 for completed view.
Secure |
Horizontal Flue |
Heat Shield |
Figure 13.2
Figure 13.3 - Completed View
November 5, 2010 | Page 13 |