R
Cumberland Gap Wood Stove
E. Leg Leveling System
1.Thread Allen bolts through nuts until flush. Figure 16.1. The Allen bolts and nuts are included in the component pack inside the appliance firebox.
2.Slide assembled nuts and bolts into slots on legs with the nuts on the bottom. Figure 16.2. Use a 5/32 Allen wrench to adjust legs up and down to desired level. Figure 16.3.
Figure 16.1
Figure 16.2
F.Side Fuel-Loading-Door Locking Mechanism
The side fuel loading door is shipped locked in place. Figure 16.4
You must first decide where you are locating your stove and determine if you meet the minimum required clearances from combustibles for loading wood into the firebox from the side door.
If you do not meet the clearances found on page10, leave the door locked in place. If you unlock the door without meeting the minimum required clearances YOU WILL VOID YOUR
WARRANTY AND ASSUME ALL RESPONSIBILITIES.
If you meet the minimum clearances, follow the instructions to unlock the door.
If in the future you decide to relocate your stove, again determine if you meet the mimimum required clearances to combustibles in the new location. If you do not, you are required to lock the door shut and it must remain locked at all times.
Instructions To Unlock Side Fuel Door
1. Open front door.
2.. Using a
3. Save the bracket and bolt for potential future use.
Figure 16.3 - Bolt fully extended
Figure 16.4
Page 16 | November 5, 2010 |
